掃一掃，手機瀏覽
- 西門子（SIEMENS）G120變頻器200KW6SL3210-1PE33-7CL0
詳細信息
適用對象： G120/S120 功率模塊 PM240-2 用途：G120變頻器200KW 性能：耐低溫;防水 工作溫度：-20 至 +50°C ℃ 品牌：西門子（SIEMENS） 型號：6SL3210-1PE33-7CL0 西門子6SL3210-1PE33-7CL0參數 技術
SINAMICS G120/S120 功率模塊 PM240-2 FSG 集成濾波器 EMV-Kat C3 帶集成式制動斬波器 380-480V+10/-10% 三相交流 47-63Hz 高過載功率：160kW 對于 200% 3S、150% 57S、 100% 240S；環境溫度 -20 至 +50°C (HO)，線路 低過載：200kW 對于 150% 3S、110% 57S、 100% 240S；環境溫度 -20 至 +40°C (LO) 1000x305x357（高x寬x深），FSG 防護方式 IP20 不帶控制單元和 操作單元 批準從 CU 固件- 版本 V4.7 SP9 和 V5.1
上�？褙S電氣設備有限公司 低價銷售 西門子 ET200、S7-200CN、S7-200、Smart200、S7-300、S7-400、S7-1200、S7-1500.電源6EP .7KM 測量儀表..DP電纜/DP接頭，網線、網線接頭、6FC、6SN、6XV.S120、V10、V20、V60、V80、V90,G110、G120、6RA、6GK.6GT .低壓系列 軟啟動器.伺服數控備件、NCU、
MM420.MM440.系列變頻器.LOGO系列
上�？褙S電氣設備有限公司聯 系 人 ： 顏經理
聯 系 ：
微 ：Q ： 3160697865
概述
PM240‑2 Power Modules – 0.55 kW to 250 kW (0.75 hp to 400 hp), IP20 degree of protection
PM240‑2 Power Modules, frame sizes FSA to FSG (with Control Unit and Operator Panel)
The PM240‑2 Power Modules are based on a new hardware platform. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.
Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).
The PM240‑2 Power Modules in frame sizes FSA to FSF are available both with and without an integrated line filter class A of compact design for 200 V, 400 V and 690 V line voltages (except PM240‑2 frame sizes FSD to FSF: 200 V). The PM240‑2 Power Modules in frame size FSG are available with an integrated line filter Category C3 of compact design for 400 V and 690 V line voltages, also with integrated line filter Category C2 for a line voltage of 400 V. In addition, a DC link reactor is integrated in the PM240‑2 Power Modules, frame sizes FSD to FSG, and therefore no line reactor is required.
The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.
The PM240‑2 Power Module has an integrated braking chopper. In generating mode, the excess energy of the DC link can be dissipated by means of an optional braking resistor.
The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).
Push-through variant
Example: PM240‑2 Power Modules, degree of protection IP20, push-through variant, frame sizes FSD to FSF (with Control Unit and Operator Panel)
The push-through variants in the frame sizes FSA to FSF allow the cooling fins of the Power Modules to be pushed through the rear panel of the control cabinet. Push-through variants should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.
Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.PM250 Power Modules – 7.5 kW to 90 kW (10 hp to 125 hp), IP20 degree of protection
PM250 Power Modules, frame sizes FSC to FSF
PM250 Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking chopper is not required).
The PM250 Power Module features an absolutely unique technology – Efficient Infeed Technology. This feature provides the ability to feed energy back into the supply system in the generator mode (electronic braking) so that the energy is not converted into heat in a braking resistor. This saves space in the control cabinet. The time-consuming process of dimensioning the braking resistor and the expense of the extra wiring are eliminated. Furthermore, heat losses in the control cabinet are reduced.
Further, the innovative circuit design reduces the line harmonics. There is no need to use an optional line reactor at the supply infeed. This saves space and costs for engineering and procurement.
The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).
Frame sizes FSD to FSF of the PM250 Power Modules are available both with as well as without integrated line filter class A.
For frame size FSC of the PM250 Power Module with an integrated line filter class A, an additional base filter of class B is available for achieving class B (see section Line-side components).
The PM250 Power Module is also designed for safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).
The PM250 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.
Note:
Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.
集成
All Power Modules have the following connections and interfaces:
- PM‑IF interface to connect the Power Module to the Control Unit. The Power Module also supplies power to the Control Unit using an integrated power supply
- Motor connection using screw-type terminals or screw studs
- 2 PE/protective conductor connections
- Shield connection plate
Connection example for PM240‑2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter
Connection example for PM240‑2 Power Modules, frame sizes FSD to FSG, with or without integrated line filter
Connection example for PM250 Power Modules with or without integrated line filter
Power and DC link components that are optionally available depending on the Power Module used
The following line-side components, DC link components and load-side power components are optionally available in the appropriate frames sizes for the Power Modules:
Frame size
FSA
FSB
FSC
FSD
FSE
FSF
FSG
PM240‑2 Power Module with integrated braking chopper
Available frame sizes
- 200 V versions
✓
✓
✓
✓ 1)
✓ 1)
✓ 1)
–
- 400 V versions
✓
✓
✓
✓
✓
✓
✓
- 690 V versions
–
–
–
✓ 2)
✓ 2)
✓
✓
Line-side components
Line filter class A
F
F
F
F 1)
F 1)
F 1)
–
Line filter class B (only for 400 V versions)
U 3)
U 3)
U 3)
–
–
–
–
Line filters Category C2 or C3 (for 400 V versions frame size FSG)
–
–
–
–
–
–
I
Line filters Category C3 (for 690 V versions frame size FSG)
–
–
–
–
–
–
I 4)
Line reactor (only for 3 AC versions 5))
S 6)
S 6)
S 6)
I
I
I
I
DC link components
Braking resistor
S
S
S
S
S
S
S
Load-side power components
Output reactor
S
S
S
S 2)
S 2)
S
S
dv/dt filter plus VPL (for 400 V and 690 V versions only 9))
S
S
S
S
S
S
S
PM250 Power Module with line-commutated energy recovery
Available frame sizes
–
–
✓
✓
✓
✓
–
Line-side components
Line filter class A
–
–
I
F
F
F
–
Line filter class B
–
–
U
–
–
–
–
Line reactor 7)
–
–
– 7)
– 7)
– 7)
– 7)
–
DC link components
Braking resistor 8)
–
–
– 8)
– 8)
– 8)
– 8)
–
Load-side power components
Output reactor
–
–
U
S
S
S
–
Sine-wave filter
–
–
U
S
S
S
–
U = Base component
S = Lateral mounting
I = Integrated
F = Power Modules available with and without integrated filter class A
– = Not possible
1) The 200 V versions of the PM240‑2 Power Modules, frame sizes FSD to FSF, are only available without integrated line filter.
2) There are no optional output reactors available for 690 V versions of PM240-2 Power Modules, frame sizes FSD and FSE.
3) Lateral mounting is the only possible option for push-through variants.
4) The 690 V versions of the PM240‑2 Power Modules frame size FSG are only available with an integrated Category C3 filter. To operate the converter also within TN systems with grounded outer conductor, you must remove the grounding screw.
5) With the appropriate wiring, the line reactors for 200 V 3 AC can be used for the 200 V versions for 200 V 1 AC. Further information can be found on the Internet at:
6) For frame sizes FSA to FSC, for lines with uk < 1 %, it is recommended that you use a line reactor or the next more powerful Power Module. Further information can be found on the Internet at:
7) A line reactor is not required and must not be used in conjunction with a PM250 Power Module.
8) A PM250 Power Module is capable of line-commutated energy feedback. A braking resistor cannot be connected and is not necessary.
9) The 690 V versions of the PM240‑2 Power Modules require motors with a suitable isolating system for 690 V converter operation (IVIC‑C premium). The VSD10 line with corresponding SIMOTICS GP 1LE109 General Purpose motors or SIMOTICS SD 1LE159 Severe Duty motors is ideally suited for converter operation at 690 V.Additional information is available in Catalog D 81.1.
General design information
Converter comprising a Power Module (PM), a Control Unit (CU), and base components (side view)
- If at all possible, the line filter should be mounted directly below the converter 1).
- With lateral mounting, the line-side components have to be mounted on the left side of the converter, and the load-side
components on the right side. - Braking resistors have to be mounted directly on the control cabinet wall due to heating issues.
Recommended installation combinations of the converter and optional power and DC link components
Power Module
Base
Lateral mounting
Frame size
Left of the converter
(for line-side components)Right of the converter
(for load-side power components and DC link components)FSA and FSB
Line filter
Line reactor
Output reactor or
dv/dt filter plus VPL and/or
braking resistorFSC
Line filter 1)
Line reactor
Output reactor or
dv/dt filter plus VPL and/or
braking resistorFSD and FSE
–
Line filter
Output reactor or
sine-wave filter or dv/dt filter plus VPL and/or
braking resistorFSF and FSG
–
Line filter
Output reactor or
sine-wave filter or dv/dt filter plus VPL and/or
braking resistor
1) With the PM250 Power Module, frame size FSC, the output reactor and sine-wave filter can be installed as base components. The output reactor or sine-wave filter should be mounted under the line filter.
Maximum permissible cable lengths from the motor to the converter when using output reactors, dv/dt filters plus VPL or filters depending on the voltage range and the Power Module being used
Maximum permissible motor cable lengths (shielded/unshielded) in m (ft)
Frame size
FSA
FSB
FSC
FSD
FSE
FSF
FSG
PM240‑2 Power Module with integrated braking chopper
Without optional power components
- 200 V versions without integrated line filter
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
200/300 (656/984)
200/300 (656/984)
300/450 (984/1476)
–
- 200 V versions with integrated line filter
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
–
–
–
–
- 400 V versions without integrated line filter
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
200/300 (656/984)
200/300 (656/984)
300/450 (984/1476)
300/450 (984/1476)
- 400 V versions with integrated line filter
50/100 (164/328)
100/100 1) (328/328) 1)
150/150 1) (492/492) 1)
200/300 (656/984)
200/300 (656/984)
300/450 (984/1476)
300/450 (984/1476)
- 690 V versions
–
–
–
200/300 (656/984)
200/300 (656/984)
300/450 (984/1476)
300/450 (984/1476)
With optional output reactor
- At 200 ... 240 V 1 AC/3 AC
150/225 (492/738)
150/225 (492/738)
150/225 (492/738)
200/300 (656/984) 2)
200/300 (656/984) 2)
300/450 (984/1476) 2)
–
- At 380 ... 415 V 3 AC
150/225 (492/738)
150/225 (492/738)
150/225 (492/738)
200/300 (656/984) 2)
200/300 (656/984) 2)
300/450 (984/1476) 2)
300/450 (984/1476) 2)
- At 440 ... 480 V 3 AC
100/150 (328/492)
100/150 (328/492)
100/150 (328/492)
200/300 (656/984) 2)
200/300 (656/984) 2)
300/450 (984/1476) 2)
300/450 (984/1476) 2)
- At 500 ... 690 V 3 AC
–
–
–
200/300 (656/984) 2)
200/300 (656/984) 2)
300/450 (984/1476) 2)
300/450 (984/1476) 2)
With optional dv/dt filter plus VPL
- At 380 ... 480 V 3 AC
350/525 (1148/1723)
350/525 (1148/1723)
350/525 (1148/1723)
30 kW: 350/525 (1148/1723)
37 kW: 450/650 (1476/2133) 3)
450/650 (1476/2133) 3)
450/650 (1476/2133) 3)
–
- At 500 ... 690 V 3 AC
–
–
–
350/525 (1148/1723)
350/525 (1148/1723)
450/650 (1476/2133) 3)
450/650 (1476/2133) 3)
With integrated line filter
According to EN 55011 to comply with radio interference emissions according to EN 61800‑3 EMC Category C2
- At 200 ... 240 V 1 AC/3 AC
50/– (164/–)
50/– (164/–)
50/– (164/–)
–
–
–
–
- At 380 ... 480 V 3 AC
50/– (164/–)
100/– (328/–) 4)
150/– (492/–) 4)
150/– (492/–)
150/– (492/–)
150/– (492/–)
150/– (492/–) (Category
C2)
300 /– (984/–) (Category
C3)
- At 500 ... 690 V 3 AC
–
–
–
100/– (328/–)
100/– (328/–)
150 /– (492/–) (Category C3)
300 /– (984/–) (Category
C3 5))
With optional, external line filter class B
According to EN 55011 to comply with conducted radio interference emissions according to EN 61800‑3 EMC Category C1 6), together with unfiltered Power Module
- At 380 ... 480 V 3 AC
50/– (164/–)
50/– (164/–)
50/– (164/–)
–
–
–
–
With optional, external line filter class B
According to EN 55011 and optional output reactor to comply with radio interference emissions according to EN 61800‑3 EMC Category C2 6), together with unfiltered Power Module
- At 380 ... 415 V 3 AC
150/– (492/–)
150/– (492/–)
150/– (492/–)
–
–
–
–
- At 440 ... 480 V 3 AC
100/– (328/–)
100/– (328/–)
100/– (328/–)
–
–
–
–
PM250 Power Module with line-commutated energy recovery
Without optional power components
–
–
25/100 (82/328)
50/100 (164/328) 7)
50/100 (164/328) 7)
50/100 (164/328) 7)
–
With optional output reactor
- At 380 ... 400 V 3 AC
–
–
150/225 (492/738)
200/300 (656/984)
200/300 (656/984)
200/300 (656/984)
–
- At 401 ... 480 V 3 AC
–
–
100/150 (328/492)
200/300 (656/984)
200/300 (656/984)
200/300 (656/984)
–
With optional sine-wave filter
- At 380 ... 480 V 3 AC
–
–
200/300 (656/984)
200/300 (656/984)
200/300 (656/984)
200/300 (656/984)
–
1) The values apply with low-capacitance CY cables – the max. permissible motor cable length is 50 m (164 ft) (shielded) and 100 m (328 ft) (unshielded) as standard.
2) For frame sizes FSD to FSG the maximum permissible cable lengths are not increased with an output reactor. By means of the output reactor, the loading of the motor windings is reduced by lower rates of voltage rise (dv/dt). By means of two output reactors connected in series, the maximum permissible cable lengths for frame sizes FSD and FSE are increased to 350 m (1148 ft) (shielded) and 525 m (1723 ft) (unshielded), and for frame sizes FSF and FSG to 525 m (1723 ft) (shielded) and 800 m (2625 ft) (unshielded). There are no optional output reactors available for 690 V versions of PM240-2 Power Modules, frame sizes FSD and FSE.
3) Maximum overvoltage at the motor terminals <1350 V with cable lengths up to 450 m (1476 ft) shielded or 650 m (2133 ft) unshielded – maximum overvoltage at the motor terminals <1500 V with cable lengths up to 525 m (1723 ft) shielded or 800 m (2625 ft) unshielded.
4) The values apply with low-capacitance CY cables - the max. permissible motor cable length is 50 m (164 ft) (shielded) as standard.
5) The 690 V versions of the PM240‑2 Power Modules frame size FSG are only available with an integrated Category C3 filter. To operate the converter also within TN systems with grounded outer conductor, you must remove the grounding screw.
6) Further information is available on the Internet at
7) Max. motor cable length 25 m (82 ft) (shielded) for Power Modules with integrated line filter to maintain the limit values acc. to EN 61800‑3 Category C2.
技術規范
General technical specifications
Power Modules
PM240‑2
PM250
System operating voltage
FSA ... FSC:
200 … 240 V 1 AC/3 AC ±10 %
380 … 480 V 3 AC ±10 %FSD ... FSG:
200 … 240 V 3 AC ±10 % (in operation -20 % < 1 min)
380 ... 480 V 3 AC ±10 % (in operation -20 % < 1 min)
500 … 690 V 3 AC ±10 % (in operation -20 % < 1 min)380 ... 480 V 3 AC ±10 %
Line supply requirements
Short-circuit power ratio RSC200 V: >25
With RSC >50 it is advisable for FSA to FSC to install a line reactor, or alternatively, to select a Power Module with the next-higher power rating.
400 V: >25
With RSC >100 it is advisable for FSA to FSC to install a line reactor, or alternatively, to select a Power Module with the next-higher power rating.
690 V: No restriction
>100
Input frequency
47 ... 63 Hz
Output frequency
- Control mode V/f
0 ... 550 Hz
- Control mode Vector
0 ... 240 Hz
Pulse frequency
200 V: 4 kHz
400 V: ≤55 kW: 4 kHz; ≥75 kW: 2 kHz
690 V: 2 kHz
For higher pulse frequencies, see derating data
4 kHz
For higher pulse frequencies, see derating data
Power factor λ
FSA ... FSC:
0.7 ... 0.85FSD ... FSG:
- 200 V: >0.95
- 400 V and 690 V: >0.90.9
Offset factor cos φ
FSA ... FSC: >0.96
FSD ... FSG: 0.98 ... 0.99
0.95 capacitive
Converter efficiency
200 V: >96 %
400 V: >97 %
690 V: >98 %
95 ... 97 %
Output voltage, max.
as % of input voltage
95 %
87 %
Overload capability
- Low overload
(LO)
Note:
No reduction in base-load current IL for use of overload.
1.5 × base-load current IL (i.e. 150 % overload) for 3 s plus 1.1 × base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s
1.5 × base-load current IL (i.e. 150 % overload) for 3 s plus 1.1 × base-load current IL (i.e. 110 % overload) for 57 s within a cycle time of 300 s
- High overload
(HO)
Note:
No reduction in base-load current IH for use of overload.
2 × base-load current IH (i.e. 200 % overload) for 3 s plus 1.5 × base-load current IH (i.e. 150 % overload) for 57 s within a cycle time of 300 s
2 × base-load current IH (i.e. 200 % overload) for 3 s plus 1.5 × base-load current IH (i.e. 150 % overload) for 57 s within a cycle time of 300 s
Possible braking methods
DC braking
Compound braking
Dynamic braking with integrated braking chopper
Energy recovery in generator operation
(max. with rated power based on high overload (HO))Degree of protection
IP20 (standard or push-through)
IP20
Operating temperature
- Low overload
(LO)
Frame sizes FSA ... FSC:
-10 ... +40 °C (14 ... 104 °F) without derating
>40 ... 60 °C (>104 ... 140 °F) see derating characteristicsFrame sizes FSD ... FSG:
-20 ... +40 °C (-4 ... +104 °F) without derating
>40 ... 60 °C (>104 ... 140 °F) see derating characteristics0 ... 40 °C (32 ... 104 °F) without derating
>40 ... 60 °C (>104 ... 140 °F) see derating characteristics- High overload
(HO)
Frame sizes FSA ... FSC:
-10 ... +50 °C (14 ... 122 °F) without derating
>50 ... 60 °C (>122 ... 140 °F) see derating characteristicsFrame sizes FSD ... FSG:
-20 ... +50 °C (-4 ... +122 °F) without derating
>50 ... 60 °C (>122 ... 140 °F) see derating characteristics0 ... 50 °C (32 ... 122 °F) without derating
>50 ... 60 °C (>122 ... 140 °F) see derating characteristicsRelative humidity
< 95 % RH, condensation not permissible
Cooling
Internal air cooling, power units with increased air cooling by built-in fans
Internal air cooling, power units with increased air cooling by built-in fans
Installation altitude
Up to 1000 m (3281 ft) above sea level without derating,
> 1000 m (3281 ft) see derating characteristicsUp to 1000 m (3281 ft) above sea level without derating,
> 1000 m (3281 ft) see derating characteristicsProtection functions
- Undervoltage
- Overvoltage
- Overload
- Ground fault
- Short-circuit
- Stall protection
- Motor blocking protection
- Motor overtemperature
- Converter overtemperature
- Parameter locking
Short-Circuit Current Rating SCCR
according to UL
(Short Circuit Current Rating) 1)200 V: 100 kA
400 V: 100 kA
690 V: 100 kA
FSC: 40 kA
FSD … FSF: 42 kA
Compliance with standards
CE, cULus, RCM, SEMI F47, RoHS, EAC, KC (only with internal or external line filters Category C2)
For frame size FSD ... FSG also: WEEE (Waste Electrical & Electronic Equipment)
CE, UL, cUL, RCM, SEMI F47
CE marking
According to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU
1) Applies to industrial control panel installations to NEC article 409 or UL 508A.
PM240‑2 Power Modules standard variant
Line voltage 200 ... 240 V 1 AC/3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PB13-0UL0
6SL3210-1PB13-8UL0
6SL3210-1PB15-5UL0
6SL3210-1PB17-4UL0
6SL3210-1PB21-0UL0
With integrated line filter class A
6SL3210-1PB13-0AL0
6SL3210-1PB13-8AL0
6SL3210-1PB15-5AL0
6SL3210-1PB17-4AL0
6SL3210-1PB21-0AL0
Output current
at 50 Hz 230 V 1 AC
- Rated current Irated 1)
A
3.2
4.2
6
7.4
10.4
- Base-load current IL1)
A
3.2
4.2
6
7.4
10.4
- Base-load current IH2)
A
2.3
3.2
4.2
6
7.4
- Maximum current Imax
A
4.6
6
8.3
11.1
15.6
Rated power
- Based on IL
kW (hp)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
- Based on IH
kW (hp)
0.37 (0.50)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency η
%
>96
>96
>96
>96
>96
Power loss 3)
At rated current
kW
0.04
0.04
0.05
0.07
0.12
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.005 (0.18)
0.0092 (0.325)
0.0092 (0.325)
0.0092 (0.325)
Sound pressure level
LpA (1 m)
dB
<50
<50
<62
<62
<62
Input current 4)
- Rated input current 1 AC/3 AC
A
7.5/4.2
9.6/5.5
13.5/7.8
18.1/9.7
24/13.6
- Based on IH 1 AC/3 AC
A
6.6/3
8.4/4.2
11.8/5.5
15.8/7.8
20.9/9.7
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 2.5
1.5 ... 6
1.5 ... 6
1.5 ... 6
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
- Shielded
m (ft)
50 (164)
50 (164)
50 (164)
50 (164)
50 (164)
- Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
73 (2.87)
73 (2.87)
100 (3.94)
100 (3.94)
100 (3.94)
- Height
mm (in)
196 (7.72)
196 (7.72)
292 (11.5)
292 (11.5)
292 (11.5)
- Depth
- Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
- With operator panel, max.
mm (in)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
Frame size
FSA
FSA
FSB
FSB
FSB
Weight, approx.
- Without integrated line filter
kg (lb)
1.4 (3.09)
1.4 (3.09)
2.8 (6.17)
2.8 (6.17)
2.8 (6.17)
- With integrated line filter
kg (lb)
1.6 (3.53)
1.6 (3.53)
3.1 (6.84)
3.1 (6.84)
3.1 (6.84)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 1 AC/3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PB21-4UL0
6SL3210-1PB21-8UL0
With integrated line filter class A
6SL3210-1PB21-4AL0
6SL3210-1PB21-8AL0
Output current
at 50 Hz 230 V 1 AC
- Rated current Irated 1)
A
13.6
17.5
- Base-load current IL1)
A
13.6
17.5
- Base-load current IH2)
A
10.4
13.6
- Maximum current Imax
A
20.8
27.2
Rated power
- Based on IL
kW (hp)
3 (4)
4 (5)
- Based on IH
kW (hp)
2.2 (3)
3 (4)
Rated pulse frequency
kHz
4
4
Efficiency η
%
>96
>96
Power loss 3)
At rated current
kW
0.14
0.18
Cooling air requirement
m3/s (ft3/s)
0.0185 (0.65)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<65
<65
Input current 4)
- Rated input current 1 AC/3 AC
A
35.9/17.7
43/22.8
- Based on IH 1 AC/3 AC
A
31.3/13.6
37.5/17.7
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
- Conductor cross-section
mm2
6 ... 16
6 ... 16
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
- Conductor cross-section
mm2
6 ... 16
6 ... 16
PE connection
Included in terminal connector
Included in terminal connector
Motor cable length, max.
- Shielded
m (ft)
50 (164)
50 (164)
- Unshielded
m (ft)
100 (328)
100 (328)
Degree of protection
IP20
IP20
Dimensions
- Width
mm (in)
140 (5.51)
140 (5.51)
- Height
mm (in)
355 (13.98)
355 (13.98)
- Depth
- Without operator panel
mm (in)
165 (6.50)
165 (6.50)
- With operator panel, max.
mm (in)
238 (9.37)
238 (9.37)
Frame size
FSC
FSC
Weight, approx.
- Without integrated line filter
kg (lb)
5 (11)
5 (11)
- With integrated line filter
kg (lb)
5.2 (11.5)
5.2 (11.5)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PC22-2UL0
6SL3210-1PC22-8UL0
6SL3210-1PC24-2UL0
6SL3210-1PC25-4UL0
6SL3210-1PC26-8UL0
With integrated line filter class A
6SL3210-1PC22-2AL0
6SL3210-1PC22-8AL0
–
–
–
Output current
at 50 Hz 230 V 3 AC
- Rated current Irated 1)
A
22
28
42
54
68
- Base-load current IL1)
A
22
28
42
54
68
- Base-load current IH2)
A
17.5
22
35
42
54
- Maximum current Imax
A
35
44
70
84
108
Rated power
- Based on IL
kW (hp)
5.5 (7.5)
7.5 (10)
11 (15)
15 (20)
18.5 (25)
- Based on IH
kW (hp)
4 (5)
5.5 (7.5)
7.5 (10)
11 (15)
15 (20)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency η
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.2
0.26
0.45
0.61
0.82
Cooling air requirement
m3/s (ft3/s)
0.0185 (0.65)
0.0185 (0.65)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
Sound pressure level
LpA (1 m)
dB
<65
<65
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
Input current 5)
- Rated input current
A
28.6
36.4
40
51
64
- Based on IH
A
22.8
28.6
36
43
56
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
6 ... 16
6 ... 16
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
6 ... 16
6 ... 16
10 ... 35
10 ... 35
10 ... 35
PE connection
Included in terminal connector
Included in terminal connector
Screw terminals
Screw terminals
Screw terminals
Motor cable length, max.
- Shielded
m (ft)
50 (164)
50 (164)
200 (656)
200 (656)
200 (656)
- Unshielded
m (ft)
100 (328)
100 (328)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
140 (5.51)
140 (5.51)
200 (7.87)
200 (7.87)
200 (7.87)
- Height
mm (in)
355 (13.98)
355 (13.98)
472 (18.58)
472 (18.58)
472 (18.58)
- Depth
- Without operator panel
mm (in)
165 (6.50)
165 (6.50)
237 (9.33)
237 (9.33)
237 (9.33)
- With operator panel, max.
mm (in)
238 (9.37)
238 (9.37)
268 (10.55)
268 (10.55)
268 (10.55)
Frame size
FSC
FSC
FSD
FSD
FSD
Weight, approx.
- Without integrated line filter
kg (lb)
5 (11)
5 (11)
17 (37.5)
17 (37.5)
17 (37.5)
- With integrated line filter
kg (lb)
5.2 (11.5)
5.2 (11.5)
–
–
–
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 200 ... 240 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PC28-0UL0
6SL3210-1PC31-1UL0
6SL3210-1PC31-3UL0
6SL3210-1PC31-6UL0
6SL3210-1PC31-8UL0
With integrated line filter class A
–
–
–
–
–
Output current
at 50 Hz 230 V 3 AC
- Rated current Irated 1)
A
80
104
130
154
178
- Base-load current IL1)
A
80
104
130
154
178
- Base-load current IH2)
A
68
80
104
130
154
- Maximum current Imax
A
136
160
208
260
308
Rated power
- Based on IL
kW (hp)
22 (30)
30 (40)
37 (50)
45 (60)
55 (75)
- Based on IH
kW (hp)
18.5 (25)
22 (30)
30 (40)
37 (50)
45 (60)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency η
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.92
1.28
1.38
1.72
2.09
Cooling air requirement
m3/s (ft3/s)
0.083 (2.93)
0.083 (2.93)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
44 ... 62 4)
44 ... 62 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
Input current 5)
- Rated input current
A
76
98
126
149
172
- Based on IH
A
71
83
110
138
164
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
PE connection
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
200 (656)
200 (656)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
300 (984)
300 (984)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
275 (10.83)
275 (10.83)
305 (12.01)
305 (12.01)
305 (12.01)
- Height
mm (in)
551 (21.69)
551 (21.69)
708 (27.87)
708 (27.87)
708 (27.87)
- Depth
- Without operator panel
mm (in)
237 (9.33)
237 (9.33)
357 (14.06)
357 (14.06)
357 (14.06)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
388 (15.28)
388 (15.28)
388 (15.28)
Frame size
FSE
FSE
FSF
FSF
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
26 (57.3)
26 (57.3)
57 (126)
57 (126)
57 (126)
- With integrated line filter
kg (lb)
–
–
–
–
–
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE11-8UL1
6SL3210-1PE12-3UL1
6SL3210-1PE13-2UL1
6SL3210-1PE14-3UL1
6SL3210-1PE16-1UL1
6SL3210-1PE18-0UL1
With integrated line filter class A
6SL3210-1PE11-8AL1
6SL3210-1PE12-3AL1
6SL3210-1PE13-2AL1
6SL3210-1PE14-3AL1
6SL3210-1PE16-1AL1
6SL3210-1PE18-0AL1
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated 1)
A
1.7
2.2
3.1
4.1
5.9
7.7
- Base-load current IL1)
A
1.7
2.2
3.1
4.1
5.9
7.7
- Base-load current IH2)
A
1.3
1.7
2.2
3.1
4.1
5.9
- Maximum current Imax
A
2.6
3.4
4.7
6.2
8.9
11.8
Rated power
- Based on IL
kW (hp)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
3 (4)
- Based on IH
kW (hp)
0.37 (0.50)
0.55 (0.75)
0.75 (1)
1.1 (1.5)
1.5 (2)
2.2 (3)
Rated pulse frequency
kHz
4
4
4
4
4
4
Efficiency η
%
>96
>96
>96
>96
>96
>96
Power loss 3)
At rated current
kW
0.04
0.04
0.04
0.07
0.1
0.12
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
0.005 (0.18)
Sound pressure level
LpA (1 m)
dB
<50
<50
<50
<50
<57
<57
Input current 4)
- Rated input current
A
2.3
2.9
4.1
5.5
7.7
10.1
- Based on IH
A
2
2.6
3.3
4.7
6.1
8.8
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
1 ... 2.5
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
- Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
- With integrated filter class A, shielded/unshielded
m (ft)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
50/100 (164/328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
73 (2.87)
- Height
mm (in)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
196 (7.72)
- Depth
- Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
- With operator panel, max.
mm (in)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
Frame size
FSA
FSA
FSA
FSA
FSA
FSA
Weight, approx.
- Without integrated line filter
kg (lb)
1.3 (2.87)
1.3 (2.87)
1.3 (2.87)
1.4 (3.09)
1.4 (3.09)
1.4 (3.09)
- With integrated line filter
kg (lb)
1.5 (3.31)
1.5 (3.31)
1.5 (3.31)
1.6 (3.53)
1.6 (3.53)
1.6 (3.53)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE21-1UL0
6SL3210-1PE21-4UL0
6SL3210-1PE21-8UL0
6SL3210-1PE22-7UL0
6SL3210-1PE23-3UL0
With integrated line filter class A
6SL3210-1PE21-1AL0
6SL3210-1PE21-4AL0
6SL3210-1PE21-8AL0
6SL3210-1PE22-7AL0
6SL3210-1PE23-3AL0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated 1)
A
10.2
13.2
18
26
32
- Base-load current IL1)
A
10.2
13.2
18
26
32
- Base-load current IH2)
A
7.7
10.2
13.2
18
26
- Maximum current Imax
A
15.4
20.4
27
39
52
Rated power
- Based on IL
kW (hp)
4 (5)
5.5 (7.5)
7.5 (10)
11 (15)
15 (20)
- Based on IH
kW (hp)
3 (4)
4 (5)
5.5 (7.5)
7.5 (10)
11 (15)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency η
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.11
0.15
0.2
0.3
0.37
Cooling air requirement
m3/s (ft3/s)
0.0092 (0.325)
0.0092 (0.325)
0.0092 (0.325)
0.0185 (0.65)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<62
<62
<62
<65
<65
Input current 4)
- Rated input current
A
13.3
17.2
22.2
32.6
39.9
- Based on IH
A
11.6
15.3
19.8
27
36
Line supply connection
U1/L1, V1/L2, W1/L3
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1.5 ... 6
1.5 ... 6
1.5 ... 6
6 ... 16
6 ... 16
Motor connection
U2, V2, W2
Terminal connector
Terminal connector
Terminal connector
Terminal connector
Terminal connector
- Conductor cross-section
mm2
1.5 ... 6
1.5 ... 6
1.5 ... 6
6 ... 16
6 ... 16
PE connection
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Included in terminal connector
Motor cable length, max.
- Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
- With integrated filter class A, shielded/unshielded
m (ft)
100/100 (328/328) 5)
100/100 (328/328) 5)
100/100 (328/328) 5)
150/150 (492/492) 5)
150/150 (492/492) 5)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
100 (3.94)
100 (3.94)
100 (3.94)
140 (5.51)
140 (5.51)
- Height
mm (in)
292 (11.5)
292 (11.5)
292 (11.5)
355 (13.98)
355 (13.98)
- Depth
- Without operator panel
mm (in)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
165 (6.50)
- With operator panel, max.
mm (in)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
238 (9.37)
Frame size
FSB
FSB
FSB
FSC
FSC
Weight, approx.
- Without integrated line filter
kg (lb)
2.9 (6.39)
2.9 (6.39)
3 (6.62)
4.7 (10.4)
4.8 (10.6)
- With integrated line filter
kg (lb)
3.1 (6.84)
3.1 (6.84)
3.2 (7.06)
5.3 (11.7)
5.4 (11.9)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
5) The values apply with low-capacitance CY cables - the max. permissible motor cable length is 50 m (164 ft) (shielded) and 100 m (328 ft) (unshielded) as standard.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE23-8UL0
6SL3210-1PE24-5UL0
6SL3210-1PE26-0UL0
6SL3210-1PE27-5UL0
6SL3210-1PE28-8UL0
6SL3210-1PE31-1UL0
With integrated line filter class A
6SL3210-1PE23-8AL0
6SL3210-1PE24-5AL0
6SL3210-1PE26-0AL0
6SL3210-1PE27-5AL0
6SL3210-1PE28-8AL0
6SL3210-1PE31-1AL0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated 1)
A
38
45
60
75
90
110
- Base-load current IL1)
A
38
45
60
75
90
110
- Base-load current IH2)
A
32
38
45
60
75
90
- Maximum current Imax
A
64
76
90
120
150
180
Rated power
- Based on IL
kW (hp)
18.5 (25)
22 (30)
30 (40)
37 (50)
45 (60)
55 (75)
- Based on IH
kW (hp)
15 (20)
18.5 (25)
22 (30)
30 (40)
37 (50)
45 (60)
Rated pulse frequency
kHz
4
4
4
4
4
4
Efficiency η
%
>97
>97
>97
>97
>97
>97
Power loss 3)
At rated current
- Without integrated line filter
kW
0.57
0.7
0.82
1.09
1.29
1.65
- With integrated line filter
kW
0.58
0.71
0.83
1.1
1.3
1.67
Cooling air requirement
m3/s (ft3/s)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
0.083 (2.93)
0.083 (2.93)
Sound pressure level
LpA (1 m)
dB
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
44 ... 62 4)
44 ... 62 4)
Input current 5)
- Rated input current
A
36
42
57
70
86
104
- Based on IH
A
33
38
47
62
78
94
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
25 ... 70
25 ... 70
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
25 ... 70
25 ... 70
PE connection
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Motor cable length, max.
- Shielded
m (ft)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
- Unshielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
275 (10.83)
275 (10.83)
- Height
mm (in)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
551 (21.69)
551 (21.69)
- Depth
- Without operator panel
mm (in)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
Frame size
FSD
FSD
FSD
FSD
FSE
FSE
Weight, approx.
- Without integrated line filter
kg (lb)
16 (35.3)
16 (35.3)
17 (37.5)
17 (37.5)
26 (57.3)
26 (57.3)
- With integrated line filter
kg (lb)
17.5 (38.6)
17.5 (38.6)
18.5 (40.8)
18.5 (40.8)
28 (61.7)
28 (61.7)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PE31-5UL0
6SL3210-1PE31-8UL0
6SL3210-1PE32-1UL0
6SL3210-1PE32-5UL0
With integrated line filter class A
6SL3210-1PE31-5AL0
6SL3210-1PE31-8AL0
6SL3210-1PE32-1AL0
6SL3210-1PE32-5AL0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
145
178
205
250
- Base-load current IL1)
A
145
178
205
250
- Base-load current IH2)
A
110
145
178
205
- Maximum current Imax
A
220
290
356
410
Rated power
- Based on IL
kW (hp)
75 (100)
90 (125)
110 (150)
132 (200)
- Based on IH
kW (hp)
55 (75)
75 (100)
90 (125)
110 (150)
Rated pulse frequency
kHz
2
2
2
2
Efficiency η
%
>97
>97
>97
>97
Power loss 3)
At rated current
- Without integrated line filter
kW
1.91
2.46
2.28
2.98
- With integrated line filter
kW
1.93
2.48
2.3
3.02
Cooling air requirement
m3/s (ft3/s)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
Input current 5)
- Rated input current
A
140
172
198
242
- Based on IH
A
117
154
189
218
Line supply connection
U1/L1, V1/L2, W1/L3
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
Motor connection
U2, V2, W2
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
PE connection
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
305 (12.01)
305 (12.01)
305 (12.01)
305 (12.01)
- Height
mm (in)
708 (27.87)
708 (27.87)
708 (27.87)
708 (27.87)
- Depth
- Without operator panel
mm (in)
357 (14.06)
357 (14.06)
357 (14.06)
357 (14.06)
- With operator panel, max.
mm (in)
388 (15.28)
388 (15.28)
388 (15.28)
388 (15.28)
Frame size
FSF
FSF
FSF
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
57 (126)
57 (126)
61 (135)
61 (135)
- With integrated line filter
kg (lb)
63 (139)
63 (139)
65 (143)
65 (143)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules standard variant
With integrated line filter Category C2
6SL3210-1PE33-0AL0
6SL3210-1PE33-7AL0
6SL3210-1PE34-8AL0
With integrated line filter Category C3
6SL3210-1PE33-0CL0
6SL3210-1PE33-7CL0
6SL3210-1PE34-8CL0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
302
370
477
- Base-load current IL1)
A
302
370
477
- Base-load current IH2)
A
250
302
370
- Maximum current Imax
A
500
604
740
Rated power
- Based on IL
kW (hp)
160 (250)
200 (300)
250 (400)
- Based on IH
kW (hp)
132 (200)
160 (250)
200 (300)
Rated pulse frequency
kHz
2
2
2
Efficiency η
%
>98
>98
>98
Power loss 3)
At rated current
kW
3.67
4.62
6.18
Cooling air requirement
m3/s (ft3/s)
0.21 (7.42)
0.21 (7.42)
0.21 (7.42)
Sound pressure level
LpA (1 m)
dB
<74.7
<74.7
<74.7
Input current 4)
- Rated input current
A
300
365
470
- Based on IH
A
275
330
400
Line supply connection
U1/L1, V1/L2, W1/L3
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 185
35 ... 2 × 185
35 ... 2 × 185
Motor connection
U2, V2, W2
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 185
35 ... 2 × 185
35 ... 2 × 185
PE connection
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
305 (12.01)
305 (12.01)
305 (12.01)
- Height
mm (in)
1000 (39.37)
1000 (39.37)
1000 (39.37)
- Depth
- Without operator panel
mm (in)
357 (14.06)
357 (14.06)
357 (14.06)
- With operator panel
mm (in)
388 (15.28)
388 (15.28)
388 (15.28)
Frame size
FSG
FSG
FSG
Weight, approx.
- With integrated line filter Category C2
kg (lb)
107 (236)
114 (251)
122 (269)
- With integrated line filter Category C3
kg (lb)
105 (231)
113 (249)
120 (265)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 500 ... 690 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PH21-4UL0
6SL3210-1PH22-0UL0
6SL3210-1PH22-3UL0
6SL3210-1PH22-7UL0
6SL3210-1PH23-5UL0
6SL3210-1PH24-2UL0
With integrated line filter class A
6SL3210-1PH21-4AL0
6SL3210-1PH22-0AL0
6SL3210-1PH22-3AL0
6SL3210-1PH22-7AL0
6SL3210-1PH23-5AL0
6SL3210-1PH24-2AL0
Output current
at 50 Hz 690 V 3 AC
- Rated current Irated1)
A
14
19
23
27
35
42
- Base-load current IL1)
A
14
19
23
27
35
42
- Base-load current IH2)
A
11
14
19
23
27
35
- Maximum current Imax
A
22
29
38
46
54
70
Rated power
- Based on IL
kW (hp)
11 (10)
15 (15)
18.5 (20)
22 (25)
30 (30)
37 (40)
- Based on IH
kW (hp)
7.5 (7.5)
11 (10)
15 (15)
18.5 (20)
22 (25)
30 (30)
Rated pulse frequency
kHz
2
2
2
2
2
2
Efficiency η
%
>98
>98
>98
>98
>98
>98
Power loss 3)
At rated current
- Without integrated line filter
kW
0.35
0.44
0.52
0.6
0.77
0.93
- With integrated line filter
kW
0.35
0.45
0.52
0.6
0.78
0.94
Cooling air requirement
m3/s (ft3/s)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
0.055 (1.94)
Sound pressure level
LpA (1 m)
dB
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
45 ... 65 4)
Input current 5)
- Rated input current
A
14
18
22
25
33
40
- Based on IH
A
11
14
20
24
28
36
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
10 ... 35
PE connection
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Screw terminals
Motor cable length, max.
- Shielded
m (ft)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
200 (656)
- Unshielded
m (ft)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
300 (984)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
200 (7.87)
- Height
mm (in)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
472 (18.58)
- Depth
- Without operator panel
mm (in)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
237 (9.33)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
268 (10.55)
Frame size
FSD
FSD
FSD
FSD
FSD
FSD
Weight, approx.
- Without integrated line filter
kg (lb)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
17 (37.5)
- With integrated line filter
kg (lb)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
18.5 (40.8)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 500 ... 690 V 3 AC
PM240‑2 Power Modules standard variant
Without integrated line filter
6SL3210-1PH25-2UL0
6SL3210-1PH26-2UL0
6SL3210-1PH28-0UL0
6SL3210-1PH31-0UL0
6SL3210-1PH31-2UL0
6SL3210-1PH31-4UL0
With integrated line filter class A
6SL3210-1PH25-2AL0
6SL3210-1PH26-2AL0
6SL3210-1PH28-0AL0
6SL3210-1PH31-0AL0
6SL3210-1PH31-2AL0
6SL3210-1PH31-4AL0
Output current
at 50 Hz 690 V 3 AC
- Rated current Irated1)
A
52
62
80
100
115
142
- Base-load current IL1)
A
52
62
80
100
115
142
- Base-load current IH2)
A
42
52
62
80
100
115
- Maximum current Imax
A
84
104
124
160
200
230
Rated power
- Based on IL
kW (hp)
45 (50)
55 (60)
75 (75)
90 (100)
110 (100)
132 (125)
- Based on IH
kW (hp)
37 (40)
45 (50)
55 (60)
75 (75)
90 (100)
110 (100)
Rated pulse frequency
kHz
2
2
2
2
2
2
Efficiency η
%
>98
>98
>98
>98
>98
>98
Power loss 3)
At rated current
- Without integrated line filter
kW
1.07
1.3
1.37
1.74
1.95
2.48
- With integrated line filter
kW
1.08
1.31
1.38
1.76
1.97
2.51
Cooling air requirement
m3/s (ft3/s)
0.083 (2.93)
0.083 (2.93)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
0.153 (5.4)
Sound pressure level
LpA (1 m)
dB
44 ... 62 4)
44 ... 62 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
56 ... 68 4)
Input current 5)
- Rated input current
A
50
59
78
97
111
137
- Based on IH
A
44
54
66
85
106
122
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
25 ... 70
25 ... 70
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
35 ... 2 × 120
PE connection
Screw terminals
Screw terminals
M10 screw stud
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
200 (656)
200 (656)
300 (984)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
300 (984)
300 (984)
450 (1476)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
275 (10.83)
275 (10.83)
305 (12.01)
305 (12.01)
305 (12.01)
305 (12.01)
- Height
mm (in)
551 (21.69)
551 (21.69)
708 (27.87)
708 (27.87)
708 (27.87)
708 (27.87)
- Depth
- Without operator panel
mm (in)
237 (9.33)
237 (9.33)
357 (14.06)
357 (14.06)
357 (14.06)
357 (14.06)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
388 (15.28)
388 (15.28)
388 (15.28)
388 (15.28)
Frame size
FSE
FSE
FSF
FSF
FSF
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
26 (57.3)
26 (57.3)
60 (132)
60 (132)
60 (132)
60 (132)
- With integrated line filter
kg (lb)
28 (61.7)
28 (61.7)
64 (141)
64 (141)
64 (141)
64 (141)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 500 ... 690 V 3 AC
PM240‑2 Power Modules standard variant
With integrated line filter Category C3
6SL3210-1PH31-7CL0
6SL3210-1PH32-1CL0
6SL3210-1PH32-5CL0
Output current
at 50 Hz 690 V 3 AC
- Rated current Irated1)
A
171
208
250
- Base-load current IL1)
A
171
208
250
- Base-load current IH2)
A
144
171
208
- Maximum current Imax
A
288
342
416
Rated power
- Based on IL
kW (hp)
160 (150)
200 (200)
250 (250)
- Based on IH
kW (hp)
132 (150)
160 (150)
200 (200)
Rated pulse frequency
kHz
2
2
2
Efficiency η
%
>98
>98
>98
Power loss 3)
At rated current
kW
2.94
3.7
4.64
Cooling air requirement
m3/s (ft3/s)
0.21 (7.42)
0.21 (7.42)
0.21 (7.42)
Sound pressure level
LpA (1 m)
dB
<74.7
<74.7
<74.7
Input current 4)
- Rated input current
A
170
205
250
- Based on IH
A
160
185
225
Line supply connection
U1/L1, V1/L2, W1/L3
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 185
35 ... 2 × 185
35 ... 2 × 185
Motor connection
U2, V2, W2
M10 screw stud
M10 screw stud
M10 screw stud
- Conductor cross-section
mm2
35 ... 2 × 185
35 ... 2 × 185
35 ... 2 × 185
PE connection
M10 screw stud
M10 screw stud
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
300 (984)
300 (984)
300 (984)
- Unshielded
m (ft)
450 (1476)
450 (1476)
450 (1476)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
305 (12.01)
305 (12.01)
305 (12.01)
- Height
mm (in)
1000 (39.37)
1000 (39.37)
1000 (39.37)
- Depth
- Without operator panel
mm (in)
357 (14.06)
357 (14.06)
357 (14.06)
- With operator panel
mm (in)
388 (15.28)
388 (15.28)
388 (15.28)
Frame size
FSG
FSG
FSG
Weight, approx.
kg (lb)
114 (251)
114 (251)
114 (251)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
PM240‑2 Power Modules push-through variant
Line voltage 200 ... 240 V 1 AC/3 AC
PM240‑2 Power Modules push-through variant
Without integrated line filter
6SL3211-1PB13-8UL0
6SL3211-1PB21-0UL0
6SL3211-1PB21-8UL0
With integrated line filter class A
6SL3211-1PB13-8AL0
6SL3211-1PB21-0AL0
6SL3211-1PB21-8AL0
Output current
At 50 Hz 230 V 1 AC/3 AC
- Rated current Irated 1)
A
4.2
10.4
17.5
- Base-load current IL1)
A
4.2
10.4
17.5
- Base-load current IH2)
A
3.2
7.4
13.6
- Maximum current Imax
A
6.4
15.6
27.2
Rated power
- Based on IL
kW (hp)
0.75 (1)
2.2 (3)
4 (5)
- Based on IH
kW (hp)
0.55 (0.75)
1.5 (2)
3 (4)
Rated pulse frequency
kHz
4
4
4
Efficiency η
%
>96
>96
>96
Power loss 3)
At rated current
kW
0.04
0.12
0.18
Cooling air requirement
m3/s (ft3/s)
0.005 (0.18)
0.0092 (0.325)
0.0185 (0.65)
Sound pressure level
LpA (1 m)
dB
<56
<62
<65
Input current 4)
- Rated input current 1 AC/3 AC
A
9.6/5.5
24/13.6
43/22.8
- Based on IH 1 AC/3 AC
A
8.4/4.2
20.9/9.7
37.5/17.7
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals, plug-in
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor connection
U2, V2, W2
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals, plug-in
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
Motor cable length, max.
- Shielded
m (ft)
150 (492)
150 (492)
150 (492)
- Unshielded
m (ft)
150 (492)
150 (492)
150 (492)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
126 (4.96)
154 (6.06)
200 (7.87)
- Height
mm (in)
238 (9.37)
345 (13.58)
411 (16.18)
- Depth
- Without operator panel
mm (in)
171 (6.73)
171 (6.73)
171 (6.73)
- With operator panel, max.
mm (in)
244 (9.61)
244 (9.61)
244 (9.61)
Frame size
FSA
FSB
FSC
Weight, approx.
- Without integrated line filter
kg (lb)
1.8 (3.97)
3.4 (7.50)
5.9 (13.0)
- With integrated line filter
kg (lb)
2 (4.41)
3.7 (8.16)
6.2 (13.7)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
Line voltage 200 ... 240 V 3 AC
PM240‑2 Power Modules push-through variant
Without integrated line filter
6SL3210-1PC26-8UL0
6SL3211-1PC31-1UL0
6SL3211-1PC31-8UL0
With integrated line filter class A
–
–
–
Output current
at 50 Hz 230 V 3 AC
- Rated current Irated1)
A
68
104
178
- Base-load current IL1)
A
68
104
178
- Base-load current IH2)
A
54
80
154
- Maximum current Imax
A
108
160
308
Rated power
- Based on IL
kW (hp)
18.5 (25)
30 (40)
55 (75)
- Based on IH
kW (hp)
15 (20)
22 (30)
45 (60)
Rated pulse frequency
kHz
4
4
4
Efficiency η
%
>97
>97
>97
Power loss 3)
At rated current
kW
0.82
1.28
2.09
Cooling air requirement
m3/s (ft3/s)
0.055 (1.94)
0.083 (2.93)
0.153 (5.40)
Sound pressure level
LpA (1 m)
dB
45 ... 65 4)
44 ... 62 4)
56 ... 68 4)
Input current 5)
- Rated input current
A
64
98
172
- Based on IH
A
56
83
164
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
M10 screw stud
- Conductor cross-section
mm2
10 ... 35
25 ... 70
35 ... 2 × 120
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
M10 screw stud
- Conductor cross-section
mm2
10 ... 35
25 ... 70
35 ... 2 × 120
PE connection
Screw terminals
Screw terminals
M10 screw stud
Motor cable length, max.
- Shielded
m (ft)
200 (656)
200 (656)
300 (984)
- Unshielded
m (ft)
300 (984)
300 (984)
450 (1476)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
275 (10.83)
354 (13.94)
384 (15.12)
- Height
mm (in)
517 (20.35)
615 (24.21)
785 (30.91)
- Depth
- Without operator panel
mm (in)
238.5 (9.39)
238.5 (9.39)
358 (14.09)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
388 (15.28)
Frame size
FSD
FSE
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
19.5 (43.0)
29 (63.9)
60 (132)
- With integrated line filter
kg (lb)
–
–
–
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) Values dependent on ambient temperature and utilization.
5) The input current depends on the motor load and line impedance. The input currents apply for a load at rated power (based on Irated) for a line impedance corresponding to uK = 1 %. The current values are specified on the rating plate of the Power Module.
Line voltage 380 ... 480 V 3 AC
PM240‑2 Power Modules push-through variant
Without integrated line filter
6SL3211-1PE18-0UL1
6SL3211-1PE21-8UL0
6SL3211-1PE23-3UL0
6SL3211-1PE27-5UL0
6SL3211-1PE31-1UL0
6SL3211-1PE32-5UL0
With integrated line filter class A
6SL3211-1PE18-0AL1
6SL3211-1PE21-8AL0
6SL3211-1PE23-3AL0
6SL3211-1PE27-5AL0
6SL3211-1PE31-1AL0
6SL3211-1PE32-5AL0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
7.7
18
32
75
110
250
- Base-load current IL1)
A
7.7
18
32
75
110
250
- Base-load current IH2)
A
5.9
13.2
26
60
90
205
- Maximum current Imax
A
11.8
27
52
120
180
410
Rated power
- Based on IL
kW (hp)
3 (4)
7.5 (10)
15 (20)
37 (50)
55 (75)
132 (200)
- Based on IH
kW (hp)
2.2 (7.5)
5.5 (7.5)
11 (15)
30 (40)
45 (60)
110 (150)
Rated pulse frequency
kHz
4
4
4
4
4
2
Efficiency η
%
>96
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
0.12
0.2
0.37
1.09
1.65
2.98
Cooling air requirement
m3/s (ft3/s)
0.007 (0.25)
0.0092 (0.325)
0.0185 (0.65)
0.055 (1.94)
0.083 (2.93)
0.153 (5.40)
Sound pressure level
LpA (1 m)
dB
<56
<62
<65
45 ... 65 4)
44 ... 62 4)
56 ... 68 4)
Input current 4)
- Rated input current
A
10.1
22.2
39.9
70
104
242
- Based on IH
A
8.8
19.8
36
62
94
218
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals
Screw terminals
M10 screw stud
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
10 ... 35
25 ... 70
35 ... 2 × 120
Motor connection
U2, V2, W2
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals, plug-in
Screw terminals
Screw terminals
M10 screw stud
- Conductor cross-section
mm2
1.5 ... 2.5
1.5 ... 6
6 ... 16
10 ... 35
25 ... 70
35 ... 2 × 120
Motor cable length, max.
- Without filter, shielded/unshielded
m (ft)
150/150 (492/492)
150/150 (492/492)
150/150 (492/492)
200 (656)
200 (656)
300 (984)
- With integrated filter class A, shielded/unshielded
m (ft)
50/100 (164/328)
100/100 (328/328) 5)
150/150 (492/492) 5)
300 (984)
300 (984)
450 (1476)
Degree of protection
IP20
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
126 (4.96)
154 (6.06)
200 (7.87)
275 (10.83)
354 (13.94)
384 (15.12)
- Height
mm (in)
238 (9.37)
345 (13.58)
411 (16.18)
517 (20.35)
615 (24.21)
785 (30.91)
- Depth
- Without operator panel
mm (in)
171 (6.73)
171 (6.73)
171 (6.73)
238.5 (9.39)
238.5 (9.39)
358 (14.09)
- With operator panel, max.
mm (in)
244 (9.61)
244 (9.61)
244 (9.61)
268 (10.55)
268 (10.55)
388 (15.28)
Frame size
FSA
FSB
FSC
FSD
FSE
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
1.8 (3.97)
3.6 (7.94)
5.8 (12.8)
20 (44.1)
30.5 (67.2)
63.5 (85.2)
- With integrated line filter
kg (lb)
2 (4.41)
3.9 (8.60)
6.3 (13.9)
21.5 (47.4)
32 (70.5)
68 (150)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) The values apply with low-capacitance CY cables - the max. permissible motor cable length is 50 m (164 ft) (shielded) and 100 m (328 ft) (unshielded) as standard.
PM250 Power Modules
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
With integrated line filter
6SL3225-0BE25-5AA1
6SL3225-0BE27-5AA1
6SL3225-0BE31-1AA1
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
18
25
32
- Base-load current IL1)
A
18
25
32
- Base-load current IH2)
A
13.2
19
26
- Maximum current Imax
A
26.4
38
52
Rated power
- Based on IL
kW (hp)
7.5 (10)
11 (15)
15 (20)
- Based on IH
kW (hp)
5.5 (7.5)
7.5 (10)
11 (15)
Rated pulse frequency
kHz
4
4
4
Efficiency η
%
95
95
95
Power loss 3)
At rated current
kW
0.298
0.488
0.472
Cooling air requirement
m3/s (ft3/s)
0.038 (1.34)
0.038 (1.34)
0.038 (1.34)
Sound pressure level
LpA (1 m)
dB
<60
<60
<60
Input current 4)
- Rated input current
A
18
25
32
- Based on IH
A
13.2
19
26
Line supply connection
U1/L1, V1/L2, W1/L3
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
2.5 ... 10
2.5 ... 10
2.5 ... 10
Motor connection
U2, V2, W2
Screw terminals
Screw terminals
Screw terminals
- Conductor cross-section
mm2
2.5 ... 10
2.5 ... 10
2.5 ... 10
PE connection
On housing with M5 screw
On housing with M5 screw
On housing with M5 screw
Motor cable length, max.
- Shielded
m (ft)
25 (82)
25 (82)
25 (82)
- Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
189 (7.44)
189 (7.44)
189 (7.44)
- Height
mm (in)
334 (13.15)
334 (13.15)
334 (13.15)
- Depth
- Without operator panel
mm (in)
185 (7.28)
185 (7.28)
185 (7.28)
- With operator panel, max.
mm (in)
258 (10.16)
258 (10.16)
258 (10.16)
Frame size
FSC
FSC
FSC
Weight, approx.
kg (lb)
7.5 (16.5)
7.5 (16.5)
7.5 (16.5)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
Without integrated line filter
6SL3225-0BE31-5UA0
6SL3225-0BE31-8UA0
6SL3225-0BE32-2UA0
With integrated line filter
6SL3225-0BE31-5AA0
6SL3225-0BE31-8AA0
6SL3225-0BE32-2AA0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
38
45
60
- Base-load current IL1)
A
38
45
60
- Base-load current IH2)
A
32
38
45
- Maximum current Imax
A
64
76
90
Rated power
- Based on IL
kW (hp)
18.5 (25)
22 (30)
30 (40)
- Based on IH
kW (hp)
15 (20)
18.5 (25)
22 (30)
Rated pulse frequency
kHz
4
4
4
Efficiency η
%
>97
>97
>97
Power loss 3)
At rated current
kW
0.576
0.693
0.918
Cooling air requirement
m3/s (ft3/s)
0.022 (0.78)
0.022 (0.78)
0.039 (1.38)
Sound pressure level
LpA (1 m)
dB
<60
<60
<61
Input current 4)
- Rated input current
A
36
42
56
- Based on IH
A
30
36
42
Line supply connection
U1/L1, V1/L2, W1/L3
M6 screw studs
M6 screw studs
M6 screw studs
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
Motor connection
U2, V2, W2
M6 screw studs
M6 screw studs
M6 screw studs
- Conductor cross-section
mm2
10 ... 35
10 ... 35
10 ... 35
PE connection
On housing with M6 screw
On housing with M6 screw
On housing with M6 screw
Motor cable length 5), max.
- Shielded
m (ft)
50 (164)
50 (164)
50 (164)
- Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
Dimensions
- Width
mm (in)
275 (10.83)
275 (10.83)
275 (10.83)
- Height
- Without integrated line filter
mm (in)
419 (16.50)
419 (16.50)
419 (16.50)
- With integrated line filter
mm (in)
512 (20.16)
512 (20.16)
512 (20.16)
- Depth
- Without operator panel
mm (in)
204 (8.03)
204 (8.03)
204 (8.03)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
268 (10.55)
Frame size
FSD
FSD
FSD
Weight, approx.
- Without integrated line filter
kg (lb)
13 (28.7)
13 (28.7)
13 (28.7)
- With integrated line filter
kg (lb)
15 (33.1)
15 (33.1)
16 (35.3)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM250 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
Line voltage 380 ... 480 V 3 AC
PM250 Power Modules
Without integrated line filter
6SL3225-0BE33-0UA0
6SL3225-0BE33-7UA0
6SL3225-0BE34-5UA0
6SL3225-0BE35-5UA0
6SL3225-0BE37-5UA0
With integrated line filter
6SL3225-0BE33-0AA0
6SL3225-0BE33-7AA0
6SL3225-0BE34-5AA0
6SL3225-0BE35-5AA0
6SL3225-0BE37-5AA0
Output current
at 50 Hz 400 V 3 AC
- Rated current Irated1)
A
75
90
110
145
178
- Base-load current IL1)
A
75
90
110
145
178
- Base-load current IH2)
A
60
75
90
110
145
- Maximum current Imax
A
120
150
180
220
290
Rated power
- Based on IL
kW (hp)
37 (50)
45 (60)
55 (75)
75 (100)
90 (125)
- Based on IH
kW (hp)
30 (40)
37 (50)
45 (60)
55 (75)
75 (100)
Rated pulse frequency
kHz
4
4
4
4
4
Efficiency η
%
>97
>97
>97
>97
>97
Power loss 3)
At rated current
kW
1.01
1.217
1.605
2.234
2.638
Cooling air requirement
m3/s (ft3/s)
0.022 (0.78)
0.039 (1.38)
0.094 (3.32)
0.094 (3.32)
0.117 (4.13)
Sound pressure level
LpA (1 m)
dB
<60
<62
<60
<60
<65
Input current 4)
- Rated input current
A
70
84
102
135
166
- Based on IH
A
56
70
84
102
135
Line supply connection
U1/L1, V1/L2, W1/L3
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
M8 screw studs
- Conductor cross-section, max.
mm2
10 ... 50
10 ... 50
25 ... 120
25 ... 120
25 ... 120
Motor connection
U2, V2, W2
M6 screw studs
M6 screw studs
M8 screw studs
M8 screw studs
M8 screw studs
- Conductor cross-section, max.
mm2
10 ... 50
10 ... 50
25 ... 120
25 ... 120
25 ... 120
PE connection
On housing with M6 screw
On housing with M6 screw
On housing with M8 screw
On housing with M8 screw
On housing with M8 screw
Motor cable length 5), max.
- Shielded
m (ft)
50 (164)
50 (164)
50 (164)
50 (164)
50 (164)
- Unshielded
m (ft)
100 (328)
100 (328)
100 (328)
100 (328)
100 (328)
Degree of protection
IP20
IP20
IP20
IP20
IP20
Dimensions
- Width
mm (in)
275 (10.83)
275 (10.83)
350 (13.78)
350 (13.78)
350 (13.78)
- Height
- Without integrated line filter
mm (in)
499 (19.65)
499 (19.65)
634 (24.96)
634 (24.96)
634 (24.96)
- With integrated line filter
mm (in)
635 (25.0)
635 (25.0)
934 (36.77)
934 (36.77)
934 (36.77)
- Depth
- Without operator panel
mm (in)
204 (8.03)
204 (8.03)
316 (12.44)
316 (12.44)
316 (12.44)
- With operator panel, max.
mm (in)
268 (10.55)
268 (10.55)
380 (14.96)
380 (14.96)
380 (14.96)
Frame size
FSE
FSE
FSF
FSF
FSF
Weight, approx.
- Without integrated line filter
kg (lb)
14 (30.9)
14 (30.9)
35 (77.2)
35 (77.2)
35 (77.2)
- With integrated line filter
kg (lb)
21 (46.3)
21 (46.3)
51 (112.5)
51 (112.5)
51 (112.5)
1) The rated output current Irated and the base-load current IL are based on the duty cycle for low overload (LO).
2) The base-load current IH is based on the duty cycle for high overload (HO).
3) Typical values. You can find more information on the Internet at:
4) The input current depends on the motor load and line impedance and applies for a line impedance corresponding to uK = 1 %. The rated input currents apply for a load at rated power (based on Irated) – these current values are specified on the rating plate.
5) Max. motor cable length 25 m (82 ft) (shielded) for PM250 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
特性曲線
Derating data, PM240‑2 Power Modules
Pulse frequency
Rated power 1)
at 50 Hz 200 V 1 AC/3 ACRated output current in A
for a pulse frequency of
kW
hp
2 kHz
4 kHz
6 kHz
8 kHz
10 kHz
12 kHz
14 kHz
16 kHz
0.55
0.75
3.2
3.2
2.7
2.2
1.9
1.6
1.4
1.3
0.75
1
4.2
4.2
3.6
2.9
2.5
2.1
1.9
1.7
1.1
1.5
6
6
5.1
4.2
3.6
2.3
2.7
2.4
1.5
2
7.4
7.4
6.3
5.2
4.4
3.7
3.3
3
2.2
3
10.4
10.4
8.8
7.3
6.2
5.2
4.7
4.2
3
4
13.6
13.6
11.6
9.5
8.2
6.8
6.1
5.4
4
5
17.5
17.5
14.9
12.3
10.5
8.8
7.9
7
5.5
7.5
22
22
18.7
15.4
13.2
11
9.9
8.8
7.5
10
28
28
23.8
19.6
16.8
14
12.6
11.2
11
15
42
42
35.7
29.4
25.2
21
18.9
16.8
15
20
54
54
45.9
37.8
32.4
27
24.3
21.6
18.5
25
68
68
57.8
47.6
40.8
34
30.6
27.2
22
30
80
80
68
56
48
40
36
32
30
40
104
104
88.4
72.8
62.4
52
46.8
41.6
37
50
130
130
110.5
91
–
–
–
–
45
60
154
154
130.9
107.8
–
–
–
–
55
75
178
178
151.3
124.6
–
–
–
–
1) Rated power based on the rated output current Irated. The rated output current Irated is based on the duty cycle for low overload (LO).
Rated power 1)
at 50 Hz 400 V 3 ACRated output current in A
for a pulse frequency of
kW
hp
2 kHz
4 kHz
6 kHz
8 kHz
10 kHz
12 kHz
14 kHz
16 kHz
0.55
0.75
1.7
1.7
1.4
1.2
1
0.9
0.8
0.7
0.75
1
2.2
2.2
1.9
1.5
1.3
1.1
1
0.9
1.1
1.5
3.1
3.1
2.6
2.2
1.9
1.6
1.4
1.2
1.5
2
4.1
4.1
3.5
2.9
2.5
2.1
1.8
1.6
2.2
3
5.9
5.9
5
4.1
3.5
3
2.7
2.4
3
4
7.7
7.7
6.5
5.4
4.6
3.9
3.5
3.1
4
5
10.2
10.2
8.7
7.1
6.1
5.1
4.6
4.1
5.5
7.5
13.2
13.2
11.2
9.2
7.9
6.6
5.9
5.3
7.5
10
18
18
15.3
12.6
10.8
9
8.1
7.2
11
15
26
26
22.1
18.2
15.6
13
11.7
10.4
15
20
32
32
27.2
22.4
19.2
16
14.4
12.8
18.5
25
38
38
32.3
26.6
22.8
19
17.1
15.2
22
30
45
45
38.3
31.5
27
22.5
20.3
18
30
40
60
60
51
42
36
30
27
24
37
50
75
75
63.8
52.5
45
37.5
33.8
30
45
60
90
90
76.5
63
54
45
40.5
36
55
75
110
110
93.5
77
–
–
–
–
75
100
145
145
123.3
101.5
–
–
–
–
90
125
178
178
151.3
124.6
–
–
–
–
110
150
205
143.5
–
–
–
–
–
–
132
200
250
175
–
–
–
–
–
–
160
250
302
211.4
151
120.8
–
–
–
–
200
300
370
259
185
148
–
–
–
–
250
400
477
333.9
238.5
190.8
–
–
–
–
1) Rated power based on the rated output current Irated. The rated output current Irated is based on the duty cycle for low overload (LO).
Rated power 1)
at 50 Hz 690 V 3 ACRated output current in A
for a pulse frequency of
kW
hp
2 kHz
4 kHz
6 kHz
8 kHz
10 kHz
12 kHz
14 kHz
16 kHz
11
10
14
8.4
–
–
–
–
–
–
15
15
19
11.4
–
–
–
–
–
–
18.5
20
23
13.8
–
–
–
–
–
–
22
25
27
16.2
–
–
–
–
–
–
30
30
35
21
–
–
–
–
–
–
37
40
42
25.2
–
–
–
–
–
–
45
50
52
31.2
–
–
–
–
–
–
55
60
62
37.2
–
–
–
–
–
–
75
75
80
48
–
–
–
–
–
–
90
100
100
60
–
–
–
–
–
–
110
100
115
69
–
–
–
–
–
–
132
125
142
85.2
–
–
–
–
–
–
160
150
171
102.6
–
–
–
–
–
–
200
200
208
124.8
–
–
–
–
–
–
250
250
250
150
–
–
–
–
–
–
1) Rated power based on the rated output current Irated. The rated output current Irated is based on the duty cycle for low overload (LO).
The permissible motor cable length depends on the cable type and the pulse frequency.
Ambient temperature
Permissible output current as a function of ambient temperature for low overload (LO) for PM240‑2 Power Modules, frame sizes FSA to FSC
Permissible output current as a function of ambient temperature for low overload (LO) for PM240‑2 Power Modules, frame sizes FSD to FSG
Permissible output current as a function of ambient temperature for high overload (HO) for PM240‑2 Power Modules, frame sizes FSA to FSC
Permissible output current as a function of ambient temperature for high overload (HO) for PM240‑2 Power Modules, frame sizes FSD to FSG
The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.
Installation altitude
Permissible line supplies as a function of the installation altitude
- Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the converter
- Installation altitudes between 2000 m (6562 ft) and 4000 m (13124 ft) above sea level
- Connection only to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced
The connected motors, power elements and components must be considered separately.
Permissible output current as a function of the installation altitude for PM240‑2 Power Modules at 40 °C for low overload (LO)
System operating voltage
The rated output current remains constant over the 380 V to 480 V 3 AC voltage range.
More information on the derating data of the PM240‑2 Power Modules is available in the Hardware Installation Manual on the Internet at:
Derating data, PM250 Power Modules
Pulse frequency
Rated power
at 400 V 3 ACRated output current in A
for a pulse frequency of
kW
hp
4 kHz
6 kHz
8 kHz
10 kHz
12 kHz
14 kHz
16 kHz
7.5
10
18
12.5
11.9
10.6
9.2
7.9
6.6
11
15
25
18.1
17.1
15.2
13.3
11.4
9.5
15
20
32
24.7
23.4
20.8
18.2
15.6
13
18.5
25
38
32
27
23
19
17
15
22
30
45
38
32
27
23
20
18
30
40
60
51
42
36
30
27
24
37
50
75
64
53
45
38
34
30
45
60
90
77
63
54
45
41
36
55
75
110
94
77
–
–
–
–
75
100
145
123
102
–
–
–
–
90
125
178
151
125
–
–
–
–
Ambient temperature
Permissible output current as a function of ambient temperature for low overload (LO) for PM250 Power Modules, frame sizes FSC to FSF
Permissible output current as a function of ambient temperature for high overload (HO) for PM250 Power Modules, frame sizes FSC to FSF
The operating temperature ranges of the Control Units should be taken into account. The temperature ranges are specified in the section Technical specifications under Control Units.
Installation altitude
Permissible line supplies as a function of the installation altitude
- Installation altitude up to 2000 m (6562 ft) above sea level
- Connection to every supply system permitted for the converter
- Installation altitudes between 2000 m (6562 ft) and 4000 m (13124 ft) above sea level
- Connection only to a TN system with grounded neutral point
- TN systems with grounded line conductor are not permitted
- The TN line system with grounded neutral point can also be supplied using an isolation transformer
- The phase-to-phase voltage does not have to be reduced
The connected motors, power elements and components must be considered separately.
Permissible output current as a function of the installation altitude for PM250 Power Modules, frame sizes FSC to FSF
System operating voltage
Permissible output current as a function of the line voltage for PM250 Power Modules, frame sizes FSC to FSF
Permissible rated power as a function of the line voltage for PM250 Power Modules, frame sizes FSC to FSF
More information on the derating data of the PM250 Power Modules is available in the Hardware Installation Manual on the Internet at:
尺寸圖
PM240‑2 Power Modules, standard variant
Principle dimension drawing and drill pattern for PM240-2 Power Modules, standard variant, with/without integrated line filter
Frame size
Dimensions
in mm (inches)
Drilling dimensions
in mm (inches)
Cooling clearance 2)
in mm (inches)
Mounting
a
(width)b
(height)c
(depth) 1)d
e
f
top
bottom
front
With bolts
PM240-2 Power Modules, standard variant, with/without integrated line filter
FSA
73
(2.87)196
(7.72)165
(6.5)62.3
(2.45)186
(7.32)6
(0.24)80
(3.15)100
(3.94)0
(0)3 × M4
FSB
100
(3.94)292
(11.5)165
(6.5)80
(3.15)281
(11.06)6
(0.24)80
(3.15)100
(3.94)0
(0)4 × M4
FSC
140
(5.51)355
(13.98)165
(6.5)120
(4.72)343
(13.5)6
(0.24)80
(3.15)100
(3.94)0
(0)4 × M5
FSD
200
(7.87)472
(18.58)237
(9.33)170
(6.69)430
(16.93)7
(0.28)300
(11.81)350
(13.78)100
(3.94)4 × M5
FSE
275
(10.83)551
(21.69)237
(9.33)230
(9.06)509
(20.04)8.5
(0.33)300
(11.81)350
(13.78)100
(3.94)4 x M6
FSF
305
(12.01)708
(27.87)357
(14.06)270
(10.63)680
(26.77)13
(0.51)300
(11.81)350
(13.78)100
(3.94)4 × M8
FSG
305
(12.01)1000
(39.37)357
(14.06)265
(10.43)970.5
(38.21)15
(0.59)300
(11.81)350
(13.78)100
(3.94)4 × M10
1) Increased depth:
• When the CU230P-2 Control Unit is plugged on, the depth increases by
- 58 mm (2.28 in) for frame sizes FSA to FSC
- 16 mm (0.63 in) for PM240‑2, frame sizes FSD to FSG
• When the CU240E-2 Control Unit is plugged on, the depth increases by
- 41 mm (1.61 in) for frame sizes FSA to FSC
- 0 mm (0 in) for PM240‑2, frame sizes FSD to FSG
• When the CU250S-2 Control Unit is plugged in, the depth increases by
- 62 mm (2.44 in) for frame sizes FSA to FSC
- 19 mm (0.75 in) for PM240‑2, frame sizes FSD to FSG
• When the IOP‑2/BOP‑2 is plugged on, the depth increases by a further 11 mm (0.43 in)
2)The Power Modules can be mounted side by side. A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.
PM240‑2 Power Modules, push-through variant
Principle dimension drawing and drill pattern for PM240-2 Power Modules, frame sizes FSA to FSC, push-through variant, with/without integrated line filter class A
Frame size
Dimensions
in mm (inches)
Drilling dimensions
in mm (inches)
Section of cabinet
in mm (inches)
Cooling clearance
in mm (inches)
Mounting
a
(width)b
(height)c
(depth) 1)d
e
f
g
(width)h
(height)top
bottom
side 2)
With bolts
PM240‑2 Power Modules, IP20 degree of protection, push-through variant, with/without integrated line filter class A
FSA
126
(4.96)238
(9.37)171
(6.73)106
(4.17)103
(4.06)27
(1.06)88
(3.46)198
(7.8)80
(3.15)100
(3.94)0
(0)8 × M5
FSB
154
(6.06)345
(13.58)171
(6.73)134
(5.28)148
(5.83)34.5
(1.36)116
(4.57)304
(11.97)80
(3.15)100
(3.94)0
(0)8 × M5
FSC
200
(7.87)411
(16.18)171
(6.73)174
(6.85)123
(4.84)30.5
(1.2)156
(6.14)365
(14.37)80
(3.15)100
(3.94)0
(0)10 × M5
1) Overall depth, of which 117.7 mm (4.63 in) is inside and 53.1 mm (2.09 in) is outside the control cabinet. Increased depth:
• When the CU230P‑2 Control Unit is plugged on, the depth increases by 58 mm (2.28 in)
• When the CU240E-2 Control Unit is plugged on, the depth increases by 41 mm (1.61 in)
• When the CU250S-2 Control Unit is plugged on, the depth increases by 62 mm (2.44 in)
• When the IOP‑2/BOP‑2 is plugged on, the depth increases by a further 11 mm (0.43 in)
2) The Power Modules can be mounted side by side (mounting frame to mounting frame). A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.
Principle dimension drawing and drill pattern for PM240-2 Power Modules, frame sizes FSD to FSF, push-through variant, with/without integrated line filter class A
Frame size
Dimensions
in mm (inches)
Drilling dimensions
in mm (inches)
Section of cabinet
in mm (inches)
Cooling clearance
in mm (inches)
Mounting
a
(width)b
(height)c
(depth) 1)d1
d2
e
f
g
(width)h
(height)top
bottom
side 2)
front
With bolts
PM240‑2 Power Modules, IP20 degree of protection, push-through variant, with/without integrated line filter class A
FSD
275
(10.83)517
(20.35)238.5
(9.39)276
(10.87)145
(5.71)240
(9.45)39
(1.54)216
(8.5)468
(18.43)350
(13.78)350
(13.78)0
(0)29
(1.14)10 × M5
FSE
354
(13.94)615
(24.21)238.5
(9.39)302.5
(11.91)230
(9.06)297.5
(11.71)45
(1.77)285
(11.22)545
(21.46)350
(13.78)350
(13.78)0
(0)29
(1.14)10 × M5
FSF
384
(15.12)785
(30.91)358
(14.09)350
(13.78)223
(8.78)227
(8.94)48
(1.89)315
(12.4)690
(27.17)80
(3.15)100
(3.94)0
(0)100
(3.94)12 × M5
1) Overall depth, of which for FSD and FSE 141 mm (5.55 in) is inside and 97.5 mm (3.84 in) outside the control cabinet, and for frame size FSF 177.5 mm (6.99 in) inside and 180.5 mm (7.1 in) outside the control cabinet. Increased depth:
• When the CU230P‑2 Control Unit is plugged on, the depth increases by 15.5 mm (0.61 in), and with blanking cover, IOP‑2 or BOP‑2 by a further 11 mm (0.43 in)
• When the CU240E-2 Control Unit is plugged on, the depth does not increase, and with blanking cover, IOP‑2 or BOP‑2 by 11 mm (0.43 in)
• When the CU250S‑2 Control Unit is plugged on, the depth increases by 18.5 mm (0.73 in), and with blanking cover, IOP‑2 or BOP‑2 by a further 11 mm (0.43 in)
2) The Power Modules can be mounted side by side (mounting frame to mounting frame). A side clearance of 1 mm (0.04 in) is recommended for tolerance-related reasons.
PM250 Power Modules – IP20 degree of protection
Principle dimension drawing and drill pattern for PM250 Power Modules, IP20 degree of protection, with/without integrated line filter class A
Frame size
Dimensions
in mm (inches)
Drilling dimensions
in mm (inches)
Cooling clearance
in mm (inches)
Mounting
a
(width)b
(height)c
(depth) 1)d
e
f
top/bottom
side
front
With bolts, nuts and washers
PM250 Power Modules, IP20 degree of protection, with/without integrated line filter class A
FSC
189
(7.44)334
(13.15)185
(7.28)167
(6.57)323
(12.72)6
(0.24)125
(4.92)50
(1.97) 2)0
(0)4 × M5
FSD
275
(10.83)419/512
(16.5/20.16)204
(8.03)235
(9.25)325/419
(12.8/16.5)11
(0.43)300
(11.81)0
(0)0
(0)4 × M8
FSE
275
(10.83)499/635
(19.65/25)204
(8.03)235
(9.25)405/541
(15.94/21.3)11
(0.43)300
(11.81)0
(0)0
(0)4 × M8
FSF
350
(13.78)634/934
(24.96/36.77)316
(12.44)300
(11.81)598/899
(23.54/35.39)11
(0.43)350
(13.78)0
(0)0
(0)4 × M8
-
供應商的其他相關信息
查看更多
-
產品搜索
聯系方式
- 聯系人：顏經理
- 電 話：021-31378618
- 手 機：15221476758
- 傳 真：021-37623779
- 地 址：上海市松江區樂都西路825弄89、90號
- 網 址： https://ygz1688.goepe.com/
-
公司相冊
-
西門子S7-1500
1634張圖片
-
友情鏈接